How To Replace Moto G54 Screen: A Simple Guide

Oct 30, 2025 by Jhon Lennon 47 views

Hey guys! Is your Moto G54’s screen cracked or just not working right? Don't worry; you're not alone! Accidents happen, but the good news is, you can replace the screen yourself with a bit of patience and the right tools. This guide will walk you through each step, making it easy to get your phone back in tip-top shape. So, let's dive in and get started!

What You’ll Need

Before we get started, let's make sure you have everything you need. Having the right tools and replacement parts will make the process smoother and prevent any unnecessary headaches. Here’s a comprehensive list to ensure you’re fully prepared:

Replacement Screen: Obviously, you'll need a new screen specifically for the Moto G54. Make sure to buy from a reputable source to ensure quality and compatibility. Check online marketplaces like Amazon or specialized electronics repair sites. Always read reviews before purchasing to avoid low-quality screens.
Heat Gun or Hair Dryer: You'll need a heat gun or hair dryer to soften the adhesive that holds the screen in place. A heat gun is more efficient, but a hair dryer will work if you're careful. Apply heat evenly and avoid overheating to prevent damage to internal components. Keep the heat source moving in a circular motion.
Suction Cup: A small suction cup will help you gently lift the screen away from the frame. Position it near the bottom of the screen and apply steady pressure while lifting. Avoid using excessive force, as this can crack the screen further or damage the frame.
Plastic Opening Tools: These are essential for prying open the phone without scratching or damaging the plastic frame. Avoid using metal tools, as they can easily scratch or dent the phone's housing. Insert the plastic tools into the small gap created by the suction cup and gently slide them along the edges.
Spudger: A spudger is a pointed tool used for disconnecting delicate connectors inside the phone. Use it to carefully detach ribbon cables and other small components. Avoid using metal spudgers, as they can cause short circuits. A plastic spudger is the safest option.
Small Screwdriver Set: You'll need a small screwdriver set with various Phillips head bits to remove the screws holding the internal components in place. Ensure the screwdriver fits the screws perfectly to avoid stripping them. A magnetic screwdriver can be helpful for retrieving small screws.
Tweezers: Tweezers are useful for handling small parts and connectors. Use them to carefully maneuver ribbon cables and other tiny components. Avoid using excessive force, as this can damage the delicate parts.
Isopropyl Alcohol (90% or higher): Isopropyl alcohol is used to clean the adhesive residue from the frame after removing the old screen. It helps ensure a clean surface for the new screen to adhere to. Apply it with a cotton swab or lint-free cloth.
Adhesive Strips or Glue: You'll need new adhesive strips or glue to secure the new screen to the frame. Use adhesive specifically designed for phone repairs to ensure a strong and lasting bond. Follow the manufacturer's instructions for applying the adhesive.
Lint-Free Cloth: A lint-free cloth is used to clean the screen and internal components. It prevents dust and debris from getting trapped between the screen and the frame. Use it to wipe down the screen before applying the new adhesive.
Anti-Static Wrist Strap: An anti-static wrist strap protects the phone's internal components from electrostatic discharge, which can cause damage. Wear it during the entire repair process to ground yourself and prevent static electricity from harming the phone.
Work Mat: A work mat provides a clean and organized surface to work on. It prevents small parts from getting lost and protects the phone from scratches. Use a non-slip mat to keep the phone stable during the repair process.

Gathering all these tools and materials before you start ensures that you have everything you need at your fingertips, making the screen replacement process smoother and more efficient. Take the time to organize your workspace and familiarize yourself with each tool. This preparation will significantly reduce the chances of errors and ensure a successful repair.

Step-by-Step Guide to Replacing the Screen

Alright, let’s get into the nitty-gritty of replacing your Moto G54’s screen. Follow these steps carefully, and you’ll have your phone looking brand new in no time!

Step 1: Power Off Your Phone

This is super important! Before you do anything, make sure your Moto G54 is completely powered off. This prevents any short circuits or damage during the repair process. Hold down the power button and select “Power off” from the menu. Wait a few seconds to ensure the phone is completely off before proceeding.

Step 2: Apply Heat to the Screen Edges

Grab your heat gun or hair dryer and gently heat the edges of the screen. This will soften the adhesive holding the screen in place. Move the heat source in a circular motion to avoid overheating any one spot. Focus on the edges, but don't linger too long in any area. The goal is to make the adhesive pliable, not to melt it. Applying heat evenly is crucial for a successful screen removal without damaging the frame or internal components. A good rule of thumb is to keep the heat moving and check the screen's temperature frequently to avoid overheating.

Step 3: Use the Suction Cup

Attach the suction cup near the bottom of the screen. Apply gentle, steady pressure to create a good seal. Once the suction cup is firmly attached, gently pull up on it while holding the phone firmly. This should create a small gap between the screen and the frame. If the screen doesn't budge, apply more heat and try again. Be patient and avoid using excessive force, as this can crack the screen further or damage the frame. The key is to apply consistent pressure and heat until the adhesive starts to release its grip.

Step 4: Insert Plastic Opening Tools

Once you have a small gap, insert a plastic opening tool into the gap. Gently slide the tool along the edges of the screen to loosen the adhesive. Use multiple opening tools if necessary to keep the gap open as you work your way around the phone. Avoid inserting the tools too deeply, as this can damage internal components. The goal is to carefully separate the screen from the frame without causing any damage. Take your time and be gentle, especially around the corners where the adhesive tends to be stronger.

Step 5: Carefully Remove the Screen

With the adhesive loosened, carefully lift the screen away from the frame. Be mindful of any ribbon cables connecting the screen to the phone. These cables are delicate and can be easily damaged if you pull too hard. If you encounter resistance, double-check for any remaining adhesive or hidden screws. Once the screen is free, gently flip it over to reveal the connectors.

Step 6: Disconnect the Ribbon Cables

Use your spudger to gently disconnect the ribbon cables connecting the screen to the phone. These connectors are typically held in place by small latches or clips. Use the spudger to carefully lift the latches or slide the clips to release the cables. Avoid pulling on the cables themselves, as this can damage the connectors. Take your time and be gentle to prevent any accidental damage. Once the cables are disconnected, you can safely remove the old screen.

Step 7: Clean the Frame

Now that the old screen is removed, clean the frame of any remaining adhesive residue. Use isopropyl alcohol and a lint-free cloth to wipe down the frame. Ensure the surface is clean and smooth for the new screen to adhere properly. Remove any dust or debris that may have accumulated during the repair process. A clean frame is essential for a secure and long-lasting bond between the new screen and the phone.

Step 8: Test the New Screen

Before fully installing the new screen, it's a good idea to test it. Connect the ribbon cables to the phone and power it on. Check if the screen lights up and responds to touch. Test all areas of the screen to ensure there are no dead pixels or touch sensitivity issues. If the screen works properly, you can proceed with the final installation. If not, double-check the connections and try again. If the problem persists, contact the seller for a replacement.

Step 9: Install the New Screen

With the new screen tested and working, it's time to install it permanently. Remove the protective film from the adhesive on the new screen. Carefully align the screen with the frame and gently press it into place. Ensure the screen is flush with the frame and that there are no gaps or misalignments. Apply even pressure around the edges to ensure a secure bond. Once the screen is in place, reconnect the ribbon cables and secure the latches or clips.

Step 10: Reassemble Your Phone

Now that the new screen is installed, reassemble your phone by reversing the steps you took to disassemble it. Replace any screws or components you removed during the process. Ensure everything is properly aligned and securely fastened. Take your time and double-check your work to avoid any mistakes. Once the phone is fully reassembled, power it on and test the new screen again to ensure everything is working correctly.

Tips and Tricks

Work in a Well-Lit Area: Good lighting is essential for seeing small parts and connectors. Work in a well-lit area or use a magnifying lamp to improve visibility.
Stay Organized: Keep track of all the screws and small parts you remove during the repair process. Use a magnetic parts tray or small containers to keep everything organized.
Take Breaks: If you're feeling frustrated or overwhelmed, take a break. Step away from the repair for a few minutes and come back with a fresh perspective.
Watch Videos: There are many helpful videos online that demonstrate the screen replacement process for the Moto G54. Watch a few videos before you start to familiarize yourself with the steps involved.
Don't Rush: Take your time and be patient. Rushing through the repair process can lead to mistakes and damage to your phone.

Conclusion

Replacing your Moto G54's screen might seem daunting, but with the right tools, a little patience, and this guide, you can totally do it! Just follow each step carefully, and you'll have your phone looking as good as new. Good luck, and happy repairing!